DANFOSS LEARNING

Watch the Danfoss Online Video Course Series on Danfoss Learning to learn more about Danfoss products.

Solenoid Valve EVU – Servo Operated without 0,25″ US Spade

Solenoid Valve EVU – Servo Operated with 0,25″ US Spade

EVU1 Direct Operated (without 0,25″ US Spade)

Servo Operated Solenoid Valve (EVR 32 & 40)

Servo Operated Solenoid Valve (EVR 25)

Servo Operated Solenoid Valve (EVR 15 – 20)

Direct operated solenoid valve – EVR 2

EVU1 Direct Operated

Electromagnetic valve. Both valve and coil are compact and lightweight. Semi-hermetic construction. Stainless steel armature tube top part with a metal gasket. Welded bimetal connections on the brass housing.

Assisted Lift Servo Operated Solenoid Valve (EVRAT 20)

Watch the introduction of Electromagnetic Valve. Controls the flow of refrigerant in the refrigeration system. Can be used for liquid, suction and hot gas lines with ammonia or fluorinated refrigerants. These valves are supplied complete or as separate components.

Servo Operated Solenoid Valve – EVRA 32 & 40

The servo piston with main valve plate closes against the valve seat by means of the differential pressure between the inlet and outlet side of the valve and the force of the compression spring.

Direct Operated Solenoid Valve EVRA3

Electromagnetic Valve. Energised coil pulls the plunger, allows or restrict the flow Controls the flow of refrigerant in the refrigeration system. Operates fast and safe. Long life and compact design.

Solenoid Valve – Type PMLX

PMLX valves are servo-operated main valves with screwed-on pilot solenoid valves.

Solenoid Valve – Type PML

PML valves are servo-operated main valves with screwed-on pilot solenoid valves.

Type – PM & EVM (NC)

PM valves are pilot operated main valves for regulating pressure and temperature in refrigeration systems.

Servo operated solenoid valve – EVRA 25

Electromagnetic servo operated piston valves.

Servo Operated Solenoid Valve – EVRA 20

The Electromagnetic Valve controls the flow of refrigerant in a refrigeration system.

AKVA – Expansion Valve

The AKVA valves are electrically operated expansion valves designed for refrigeration applications. The AKVA valves can be used with HCFC, HFC, CO2 and Ammonia refrigerants. The AKVA valves are normally controlled by controllers with an On/Off electrical signal. The AKVA 20 valves cover a capacity range from 500 kW to 3150 kW (R 717) and are divided up into 5 capacity ranges. The AKVA 20 valve has weld connections.

T2 Thermostatic Expansion Valves – Danfoss

Danfoss Learning – HVAC: Chillers Online Training Program

Danfoss Learning – Refrigeration Fundamentals Training Program

Danfoss Learning – Cold Room Training Program